Boat care · Spring · 5 min read
Spring boat prep in the Pacific Northwest: a 7-step checklist
Wet winters leave boats with mildew, oxidation and a green waterline. Work through these seven steps before launch.
By Mike Quigtle · Mobile Detailing By Mike
A Pacific Northwest winter is hard on a boat. Months of rain, gray skies and damp air leave oxidation on the gel coat, mildew on the vinyl and a film along the waterline. Work through this list a few weeks before launch day.
1. Walk the hull in daylight
Look for chalky, faded gel coat. If a finger swipe leaves white residue, the surface is oxidized and needs polishing before any protection goes on.
2. Wash with boat soap
Dish soap strips protection and dries out vinyl. Use a marine wash and a soft brush, and rinse from the top down.
3. Clear the waterline
Algae and scum stains set deeper every week. Remove them early in the season, before the sun bakes them in.
4. Check vinyl, carpet and cushions for mildew
Black spots and a musty smell mean moisture sat inside all winter. Dry everything fully and treat the growth before it spreads.
5. Air out the cabin
Open hatches on a dry day and leave moisture absorbers inside between trips.
6. Polish, then protect
Polishing restores the shine. A boat ceramic or marine surface coating keeps it, with a slick surface salt and algae struggle to grip.
7. Plan your fall cleanup now
Book an end-of-season wash and dry before storage. A clean, dry boat under a breathable cover starts next spring in far better shape.
Leave it to Mike
Want it done for you? Mike details and coats boats at your dock, marina or driveway.
Free quote · Open 7 days
Your driveway. Your schedule. Mike brings the shine.
Call or text a photo of your vehicle. You get a clear, upfront quote.